Base text format

Output	Full Justify	Text format				Text to image	Font size
	<FJ>	<TF> _(17.1)	<BB> _(17.1)	<RTF> _(17.2)	<MARKDOWN> _(19.0)	#UR TEXTTOIMAGE=<expr> _(17.3)	#UR FONTSIZE=<expr> _(21.0)
PDF	yes _(15.3)	yes	yes	yes	yes	yes	yes
DOC2PDF	yes	yes	yes	yes	yes	yes	yes
FDOC2PDF	yes 8) _(17.2)	yes	yes	yes	yes	yes	yes
XPS	yes _(17.2)	yes	yes	yes	yes	yes	yes
DOC	yes	yes	yes	yes	yes	yes	yes
FDOC	yes 8) _(17.2)	yes	yes	yes	yes	yes	yes
NATIVE_DOCX	yes _(15.3)	yes	yes	yes	yes	yes	yes
NATIVE_FDOCX	yes 8) _(17.2)	yes	yes	yes	yes	yes	yes
RTF	yes _(17.2)	yes	yes	yes	yes	yes	yes
FRTF	yes 8) _(17.2)	yes	yes	yes	yes	yes	yes
ODT	yes _(15.3)	yes	yes	yes	yes	yes	yes
FODT	yes 8) _(17.2)	yes	yes	yes	yes	yes	yes
ODS	yes _(15.2.1)	yes	yes	yes	yes	yes	yes
FODS	yes _{(LO) (15.3)}	yes	yes	yes	yes	yes	yes
PFODS	yes _{(LO) (15.3)}	yes	yes	yes	yes	yes	yes
XLS	yes_(15.3)	yes	yes	yes	yes	yes	yes
XLSPLAIN	yes_(15.3)	yes	yes	yes	yes	yes	yes
NATIVE_FXLSX	yes_(15.2.1)	yes	yes	yes	yes	yes	yes
NATIVE_PFXLSX	yes _(15.2.1)	yes	yes	yes	yes	yes	yes
PLAIN	-	-	-	-	-	-	-
CPLAIN	-	-	-	-	-	-	-
HTML	yes 7) _(15.3)	yes	yes	yes	yes	yes	yes
HTMLPLAIN	no	yes	yes	yes	yes	no	yes
MHT	yes 7) _(15.3)	yes	yes	yes	yes	yes	yes
CNT / previewer	yes _(17.2)	yes	yes	yes	yes	yes	yes
TIFF, BMP, GIF, JPEG, PNG, EMF	yes_(17.2)	yes	yes	yes	yes	yes	yes
XFF	-	-	-	-	-	-	-
XML	-	-	-	-	-	-	-
Print	yes_(17.2)	yes	yes	yes	yes	yes	yes

7) Since XFRX 16.0 for Opera,Fire Fox, Safari, Chrome too.

8) Full justify is supported for textbox with #UR POSITIONABSOLUTE only

#UR TEXTTOIMAGE=<expr>

Text field content will be convert to image.

Enter the following text into the comment of the source field:

Example

#UR TEXTTOIMAGE=m.plDont_Copy_Text

#UR FONTSIZE=<expr>

Supported <expr> are >0 or -1 for non stretchable fields. If <expr> is -1, then XFRX calculates optimal font size for text field size.

Enter the following text into the comment of the source field for set font size by FLDINTAB field in tablr/cursor:

Example

#UR FONTSIZE=FLDINTAB

Enter the following text into the comment of the source field for set font size calculated by text field size and content:

Example

#UR FONTSIZE=-1

#UR TRIM=<expr>

Supported <expr> are >=0 and <=5 for text fields.

In VFP 9.0 the trim mode is controlled by the "Trim mode for character expressions" setting on the "Format" tab in the "Field Properties" form.
In pre-VFP 9.0 version the trimming is controlled by a special string in fields comment: #UR TRIM=, followed by the trim mode code:

Code	Description
0	Default trimming in pre-VFP 9.0 versions - trim to nearest word
1	Trim to nearest character
2	Trim to nearest word
3	Trim to nearest character, append ellipsis
4	Trim to nearest word, append ellipsis
5	Show inner path as ellipsis

Example

#UR TRIM=3 && wraps to the nearest character and appends ellipsis

Browser not supported