Member oDocument of XFRX Session object is deprecated. You can use member oDocumentWriter. |
Member oDocument of XFRX Session object is removed. |
This paragraph applies both to VFP 9 and VFP 8. The setPasswords method is implemented both in XFRXListener and XFRXSession classes. |
PDF documents can be encrypted. XFRX use RC4/AES algorithm only with key length 40-128 bits. Default key length is 40 bits for PDF version <=1.2 and 128 bits later versions.
But it's possibly chage key length.
m.loSession.setOtherParams("KEYLENGTH", 10) && 80 bits |
To set the encryption on, call setPasswords method:
m.loSession.setPasswords(m.tcOwnerPassword, m.tcUserPassword) m.loSession.setPasswords("", "") && no password m.loSession.setPasswords("", m.tcUserPassword) && user password only (open password) - owner password will be randomly. m.loSession.setPasswords(m.tcOwnerPassword, "") && owner password only (edit password) |
The user password can be empty. If the owner password is empty, a random string will be generated as the password.
Acrobat Reader doesn't support national characters in password: https://www.adobe.com/devnet-docs/acrobat/android/en/protect.html |
Default method is V2 (RC4), but it's possibly change to AES (128 bit) - since XFRX 21.1.
m.loSession.setOtherParams("CRYPMETHOD", "AESV2") && AES 128 bits |
Method setPasswords() must be calls before method SetParams() for appending or replacing page in exsting file. |
The owner can do anything with the document. The user permissions can be set using the setPermission method:
m.loSession.setPermissions(m.tlPrintDocument, m.tlModifyDocument, ; m.tlCopyTextAndGraphics, m.tlAddOrModifyAnnotations,; m.tlFillFormFields, m.tlExtractTextAndGraphics, ; m.tlAssembleDocument, m.tlPrintDocumentInLow) |
The default values of the permissions is .F.
(false).
Parameters tlFillFormFields, tlExtractTextAndGraphics, tlAssembleDocument, tlPrintDocumentInLow are since XFRX 16.1. |
This paragraph applies both to VFP 9 and VFP 8. The method is implemented both in XFRXListener and XFRXSession classes. |
XFRX supports both whole font and font subset embedding.
OpenType font is include always. |
To embed all characters of all used fonts, call:
m.loSession.setEmbeddingType(2) |
before running the report.
To embed only the characters used, call:
m.loSession.setEmbeddingType(3) |
Embedding only subset of fonts (characters used in the document) significantly reduces the size of the generated file.
To select which font to embed (e.g. when you need just to embed the barcode font, or font that is not installed on the pc the document will be sent to), add “#UR INCLUDEFONT” (without the quotation marks) to the comments of a field that uses the font (in the report). Add “#UR INCLUDEFONT SUBSET” comment to include the font subset.
XFRX set font embedding subset for special code pages (1250, 1251, 1257, 1254, 1253, 1255) and selected font (Arial, Arial CE, Arial Narrow, Arial Black, Courier New, Courier New CE, Times New Roman, Times New Roman CE) if detect national characters. XFRX set font embedding subset allways for Symbols or if you enable PDF/A support. |
If you want change the default behavior (special code page) you can use parameter CHECKFONTFORSPECIALCODEPAGE (for disable or enable) or ADDFONTFORSPECIALCODEPAGE (for add font to list) - since XFRX 17.1
loSession.SetOtherParams("CHECKFONTFORSPECIALCODEPAGE",.F.) && Disable the behavior loSession.SetOtherParams("ADDFONTFORSPECIALCODEPAGE","Tahoma") && Add font to list |
(Obsolete since XFRX 15.7) Put "#UR SYMBOLFONT" into the comment of the report field that contains the barcode. This will instruct the engine not to do any codepage conversions and flag the font as a symbol font in the PDF document.
You can set UNICODE output for document.
To select which font to embed as UNICODE (e.g. when you need just to embed the barcode font, or font that is not installed on the pc the document will be sent to), add “#UR INCLUDEFONT UNICODE” (without the quotation marks) to the comments of a field that uses the font - in the report (since XFRX 16.0).
m.loSession.SetOtherParams("UNICODE",.T.) |
True type font in PDF support only 256 characters. It causes problems to the version XFRX 18.2 for japanese and chinese text. XFRX 19.0 use UCS2 for codepage 932, 936, 950 and UTF-8 as default option. |
m.loSession.SetOtherParams("UCS2ALLOWED",.F.) && disable using UCS2 |
The digital signature can be used to validate the document content and the identity of the signer. (You can find more at http://en.wikipedia.org/wiki/Digital_signature). XFRX implements the "MDP (modification detection and prevention) signature" based on the PDF specification version 1.7, published in November 2006.
The signing algorithm in XFRX computes the encrypted document digest and places it, together with the user certificate, into the PDF document. When the PDF document is opened, the Adobe Acrobat (Reader) validates the digest to make sure the document has not been changed since it was signed. It also checks to see if the certificate is a trusted one and complains if it is not. The signature dictionary inside PDF can also contain additional information and user rights - see below.
At this moment XFRX supports invisible signatures only (Acrobat will show the signature information, but there is no visual element on the document itself linking to the digital signature). We will support visible signatures in future versions.
In the current version, XFRX is using the CMS/PKCS #7 detached messages signature algorithm in the .net framework to calculate the digest - which means the .NET framework 2.0 or newer is required. The actual process is run via an external exe - "xfrx.sign.net.exe", that is executed during the report conversion process. In future, we can alternatively use the OpenSSL library instead.
The syntax is the same for VFP 9.0 and pre-VFP 9.0 calling methods |
To generate a signed PDF document, call the DigitalSignature() method before calling SetParams. Please see the DigitalSignature() method reference for more information about setting this parameter.
The demo application that is bundled with the package (demo.scx/demo9.scx) contains a testing self-signed certificate file (TestEqeus.pfx) and a sample that creates a signed PDF using the pfx. Please note Acrobat will confirm the file has not changed since it was signed, but it will complaing the certificate is not trusted - you would either need to add the certificate as a trusted one or you would need to use a real certificate from a certification authority (such as VeriSign).
Put #UR EMPTYSIGNATURE=expr into the comment of the report shape for creating empty field for signature. Example: #UR EMPTYSIGNATURE="My Signature"
This feature is since XFRX 17.1 |
PDF/A is an ISO standard for the digital preservation of electronic documents. PDF/A document is a PDF document with specific restrictions that ensure that the document will always display and print exactly the same way, no matter which platform or document viewer is used:
There are currently two PDF/A specifications:
XFRX currently supports specification:
PDFA level | support | unsigned | signed |
---|---|---|---|
1a | yes | valid | valid |
1b | yes | valid | valid |
2a | yes (XFRX 16.0) | valid | nonvalid |
2b | yes (XFRX 16.0) | valid | nonvalid |
2u | yes (XFRX 16.0) | valid | nonvalid |
3a | yes (XFRX 16.0) | valid | nonvalid |
3b | yes (XFRX 16.0) | valid | nonvalid |
3u | yes (XFRX 16.0) | valid | nonvalid |
Please note the PDF/A-enabled document files can be significantly larger than regular PDF documents because the used fonts must always be included. |
To generate a PDF/A document, call SetPDFA(.T.,[lcLevel]) method on the session object before processing. This method is available in VFP8 and VFP9 session objects, as well as the XFRX#DRAW object.
Example:
LOCAL m.loXFRX, m.lnRetVal m.loXFRX = EVALUATE([XFRX("XFRX#LISTENER")]) m.loXFRX.setpdfa(.T.) && 1b *m.loXFRX.setpdfa(.T.,"1a") && 1a *m.loXFRX.setpdfa(.T.,"1b") && 1b *m.loXFRX.setpdfa(.T.,"2a") && 2a *m.loXFRX.setpdfa(.T.,"2b") && 2b *m.loXFRX.setpdfa(.T.,"2u") && 2u *m.loXFRX.setpdfa(.T.,"3a") && 3a *m.loXFRX.setpdfa(.T.,"3b") && 3b *m.loXFRX.setpdfa(.T.,"3u") && 3u m.lnRetVal = m.loXFRX.SetParams("pdfa9.pdf",,,1250,,,"PDF") IF m.lnRetVal = 0 REPORT FORM demoreps\invoices OBJECT m.loXFRX ENDIF |
Put #UR COLOR "CMYK" into the comment of the report images in CMYK.
Since XFRX 18.1 this directive is obsolete. |
Put #UR COLOR "NEG" into the comment of the report images in negative colors.
Put #UR MASK "[255 255 255 255 255 255]" for images with transparent colors. See to "Color Key Masking" in pdf reference.
You can set general color for images with transparent background (since XFRX 16.1) Default color is white - RGB(255,255,255)
m.loSession.SetOtherParams("TRANSPARENTCOLOR",RGB(192,192,192)) |
Put #UR SMASKIMAGE=<expression> if you want create transparent or alpha effect. Mask image must be in grey scale (PNG, BMP) with 1 bpc, 2 bpc, 4 bpc, 8 bpc, 16 bpc. This directive is equal to /SMask operator.
Put #UR MASKIMAGE=<expression> if you want create transparent . Mask image must be in grey scale (PNG, BMP) with 1 bpc. This directive is equal to /Mask operator.
Since XFRX 18.1. If output is PDF/A-1a or PDF/A-1b then XFRX ignore the directive. |
#UR MASKIMAGE was renamed to #UR SMASKIMAGE since XFRX 19.0 |
(since XFRX 16.2.0)
PDF output knows only jpeg, bitmap and PNG pictures. Other format pictures converts to bitmap (default choice). You can change to jpeg.
m.loSession.SetOtherParams("DEFAULTPICTUREFORMAT",'jpeg') |
(since XFRX 18.1.0)
Because XFRX .18.1 (since) don't convert JPEG-CMYK to JEPG-RGB, is possibility turn off the behavior.
m.loSession.SetOtherParams("CMYK2RGB",.T.) |
(since XFRX 18.1.0)
You can use parameter TRANSPARENTOFF for backware compatibility.
m.loSession.SetOtherParams("TRANSPARENTOFF",.T.) |
On french OS you can have problem with searching in Adobe Reader. In this case you can set parameter DONOPUTDOCUMENTID, if you do not use passwords or digital signature.
m.loSession.SetOtherParams("DONOTPUTDOCUMENTID,.T.) |
If you set these parameters, xfrx copy temporary files into specified folder.
m.loSession.setOtherParams("DEVELOP",.T.) m.loSession.setOtherParams("DEVELOPFOLDER",lcPath+"_out\"+lcOut) |
If you set the parameter, output stream inside PDF will not be compressed.
m.loSession.SetOtherParams("DONOTZIPTEXTSTREAM",.T.) |
(since XFRX 16.0)
Parameter | Value | Description |
---|---|---|
PageLayout | specifying the page layout to be used when the document is opened | |
"SinglePage" | Display one page at a time | |
"OneColumn" | Display the pages in one column | |
"TwoColumnLeft" | Display the pages in two columns, with odd-numbered pages on the left | |
"TwoColumnRight" | Display the pages in two columns, with odd-numbered pages on the right | |
"TwoPageLeft" | Display the pages two at a time, with odd-numbered pages on the left | |
"TwoPageRight" | Display the pages two at a time, with odd-numbered pages on the right | |
PageMode | specifying how the document should be displayed when opened | |
"UseNone" | Neither document outline nor thumbnail images visible | |
"UseOutlines" | Document outline visible | |
"UseThumbs" | Thumbnail images visible | |
"FullScreen" | Full-screen mode, with no menu bar, window controls, or any other window visible | |
"UseOC" | Optional content group panel visible | |
"UseAttachments" | Attachments panel visible |
Parameter | Value | PDF Version | Description | |
---|---|---|---|---|
ViewerPreferences | HideToolbar | .T. | A flag specifying whether to hide the viewer application’s tool bars when the document is active. Default value: .F.. | |
ViewerPreferences | HideMenubar | .T. | A flag specifying whether to hide the viewer application’s menu bar when the document is active. Default value: .F.. | |
ViewerPreferences | HideWindowUI | .T. | A flag specifying whether to hide user interface elements in the document’s window (such as scroll bars and navigation controls), leaving only the document’s contents displayed. Default value: .F.. | |
ViewerPreferences | FitWindow | .T. | A flag specifying whether to resize the document’s window to fit the size of the first displayed page. Default value: .F.. | |
ViewerPreferences | CenterWindow | .T. | A flag specifying whether to position the document’s window in the center of the screen. Default value: .F.. | |
ViewerPreferences | DisplayDocTitle | .T. | 1.4 | A flag specifying whether the window’s title bar should display the document title taken from the Title entry of the document information dictionary (see Section 10.2.1, “Document Information Dictionary”). If false, the title bar should instead display the name of the PDF file containing the document. Default value: .F.. |
ViewerPreferences | NonFullScreenPageMode | The document’s page mode, specifying how to display the document on exiting full-screen mode. | ||
"UseNone" | Neither document outline nor thumbnail images visible. | |||
"UseOutlines" | Document outline visible. | |||
"UseThumbs" | Thumbnail images visible. | |||
"UseOC" | Optional content group panel visible. | |||
ViewerPreferences | Direction | 1.3 | The predominant reading order for text. | |
"L2R" | Left to right. | |||
"R2L" | Right to left . | |||
ViewerPreferences | PrintScaling | 1.6 | The page scaling option to be selected when a print dialog is displayed for this document | |
"None" | Indicates that the print dialog should reflect no page scaling. | |||
"AppDefault" | Indicates that applications should use the current print scaling. | |||
ViewerPreferences | Duplex | 1.7 | The paper handling option to use when printing the file from the print dialog. | |
"Simplex" | Print single-sided. | |||
"DuplexFlipShortEdge" | Duplex and flip on the short edge of the sheet . | |||
"DuplexFlipLongEdge" | Duplex and flip on the long edge of the sheet. | |||
ViewerPreferences | PickTrayByPDFSize | .T. | 1.7 | A flag specifying whether the PDF page size is used to select the input paper tray |
ViewerPreferences | PrintPageRange | "0 1" | 1.7 | The page numbers used to initialize the print dialog box when the file is printed. |
ViewerPreferences | NumCopies | 2 | 1.7 | The number of copies to be printed when the print dialog is opened for this file |
LOCAL m.loSession, m.lnRetVal m.loSession=EVALUATE([xfrx("XFRX#INIT")]) m.lnRetVal = m.loSession.SetParams("some.pdf",,,,,,"PDF") IF m.lnRetVal = 0 m.loSession.setOtherParams("PAGELAYOUT","SinglePage") && SinglePage, OneColumn, TwoColumnLeft, TwoColumnRight, TwoPageLeft, TwoPageRight m.loSession.setOtherParams("PAGEMODE","UseOutlines") && UseNone, UseOutlines, UseThumbs, FullScreen, UseOC, UseAttachments m.loSession.setOtherParams("VIEWERPREFERENCES","HIDETOOLBAR",.F.) m.loSession.setOtherParams("VIEWERPREFERENCES","HIDEMENUBAR",.F.) m.loSession.setOtherParams("VIEWERPREFERENCES","HIDEWINDOWUI",.F.) m.loSession.setOtherParams("VIEWERPREFERENCES","FITWINDOW",.F.) m.loSession.setOtherParams("VIEWERPREFERENCES","CENTERWINDOW",.T.) m.loSession.setOtherParams("VIEWERPREFERENCES","DISPLAYDOCTITLE",.T.) m.loSession.setOtherParams("VIEWERPREFERENCES","NONFULLSCREENPAGEMODE","UseOC") && UseNone,UseOutlines,UseThumbs ,UseOC m.loSession.setOtherParams("VIEWERPREFERENCES","DIRECTION","L2R") && L2R,R2L m.loSession.setOtherParams("VIEWERPREFERENCES","PRINTSCALING","AppDefault") && AppDefault, None m.loSession.setOtherParams("VIEWERPREFERENCES","DUPLEX","Simplex") && Simplex, DuplexFlipShortEdge, DuplexFlipLongEdge m.loSession.setOtherParams("VIEWERPREFERENCES","PICKTRAYBYPDFSIZE",.T.) m.loSession.setOtherParams("VIEWERPREFERENCES","PRINTPAGERANGE","0 0 1 1") && 0 1 (1-2)| 0 0 1 1 (1,2) m.loSession.setOtherParams("VIEWERPREFERENCES","NUMCOPIES",2) ENDIF |
(since XFRX 16.1)
You can set PDF version. Default version is 1.6 for XFRX 16.0, 1.7 for XFRX 16.1. Change PDF version must be first after calls setParams() method.
m.loSession.setOtherParams("VERSION","1.5") |
(since XFRX 17.0.0)
Specifies the width, in characters, of a tab. Default value is 4.
m.loSession.setOtherParams("TABSIZE",3) |
(since XFRX 17.3)
PDF 1.3 supports attachments. PDF/A-1 doesn't support attachments. PDF/A-2 does support attachments - only PDF file (PDF/A). PDF/A-3 does support attachments - any file.
For add atttchment calls method addAttachment.
LOCAL m.loSession, m.lnRetVal m.loSession=EVALUATE([xfrx("XFRX#INIT")]) m.lnRetVal = m.loSession.SetParams("some.pdf",,,,,,"PDF") IF m.lnRetVal = 0 m.loSession.addAttachment("another.pdf",.T.,"","application/pdf","Alternative") m.loSession.addAttachment("second.xls",.T.,"","application/xls","Alternative") m.loSession.ProcessReport("report.frx") ENDIF |
LOCAL m.loSession, m.lnRetVal m.loSession=EVALUATE([xfrx("XFRX#INIT")]) m.lnRetVal = m.loSession.SetParams("some.pdf",,,,,,"PDF") m.loSession.setpdfa(.T., "3B") IF m.lnRetVal = 0 * Relation type must be "Alternative" m.loFile=loSession.addAttachment("ZUGFeRD-invoice.xml",.T.,"Rechnungsdaten im ZUGFeRD-XML-Format","text/xml","Alternative") m.loFile.CreateZUGFeRDMetadata("BASIC","INVOICE","1.0") && if you use PDFA m.loSession.ProcessReport("report.frx") ENDIF |
Method CreateFACTURXMetadata() was added in XFRX 19.0 |
LOCAL m.loSession, m.lnRetVal m.loSession=EVALUATE([xfrx("XFRX#INIT")]) m.lnRetVal = m.loSession.SetParams("some.pdf",,,,,,"PDF") m.loSession.setpdfa(.T., "3B") IF m.lnRetVal = 0 * Relation type can be "Alternative" m.loFile=loSession.addAttachment("FacturX-invoice.xml",.T.,"Données de facturation FacturX XML-Format","text/xml","Alternative") m.loFile.CreateFACTURXMetadata("BASIC","INVOICE","1.0") && if you use PDFA m.loSession.ProcessReport("report.frx") ENDIF |
(http://www.isdoc.org/index.php?l=2)
LOCAL m.loSession, m.lnRetVal m.loSession=EVALUATE([xfrx("XFRX#INIT")]) m.lnRetVal = loSession.SetParams("some.pdf",,,,,,"PDF") m.loSession.setpdfa(.T., "3B") IF m.lnRetVal = 0 loFile=loSession.addAttachment("Faktura.isdoc",.T.,"ISDOC - formát elektronické fakturace","text/xml","Alternative") loFile.CreateISDOCMetadata("INVOICE","5.2") && if you use PDFA m.loSession.ProcessReport("report.frx") ENDIF |
(since XFRX 22.0)
Specifies compression level (1-9) and memory level (1-9) for deflate.
If you specify compression level to -1 (default value), then compression level will be 6.
If you specify memory level to -1 (default value), then memory level will be 8.
If you specify compression level to 9 and memory level to 9, then data after deflate will be smaller but it will take longer.
m.loSession.setOtherParams("COMPRESSIONLEVEL", -1) |
m.loSession.setOtherParams("MEMORYLEVEL", -1) |
MEMORYLEVEL was added in XFRX 23.0 |